All Products
    Menu Close

    EcoLet™ | Through-Wall Installation Kit for the 240 Range - Complete Package

    Manufacturer: EcoLet™
    SKU: Ecolet TWK 450
    This installation kit is required to achieve a safe and watertight through wall penetration and insulated vent pipe for cold weather.

    Choose the Product options below

    1.2 Meter 100mm housing extensions (colour black)

    Use one extension for a High Stud building / Use two extensions for a two-story building (when the EcoLet™ system is installed on the bottom floor)

    $391.30 excl tax
    i h

    All Heated EcoLet™ system must have insulated vent pipes when exposed to the outside air.

    The standard EcoLet™ kits come with a through ceiling vent pipe setup and will not need this kit if this setup is chosen.

    All the EcoLet™ 240 /25e/65e models must not have a bend sharper than 45 degrees, which will restrict ventilation.

    Installation kit includes the following:

    • Through-wall-kit assembly (black)
    • One additional 50mm 45 degrees bends (Maxium number of bends is 3)

    1 Meter Extensions:

    • Two 1.2 Meter 100mm housing extensions (colour black)
    • Two lengths of exterior-rated 50mm vent pipe insulation
    • 50mm vent pipe is included in the base Ecolet package
    • Two 100mm pipe saddles are included with two timber or brick mounting brackets to suit your mounting needs

    * 2 to 3 Additional 1.2 Metre Extensions are required if the ventilation stack is more than one story high.

    * Each 1.2 Metre Extension has an installed length of 1.1mm


    Standard NZ plumbing fittings do not fit the EcoLet™ ventilation pipe.
    Maximum bends - no more than 3 bends in total.
    Above the roof, ventilation components are included with the EcoLet™ system package.

    Product tags
    Customers who bought this item also bought